Examples with "torque setting value" and their translation in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Further, a limiter unit (744) limits the torque command value Tc using the limit value L, generates a torque setting value Ts, and sends the generated torque setting value Ts to a motor drive system (900).
A torque setting value calculation unit (743A) then calculates a torque setting value (Ts) on the basis of the limited torque value (TL) and the feedback torque value (Tf).
When a torque difference (ΔTup) obtained by subtracting a requested torque (T*) requested of the engine by a driver from a torque request value (Treq) of an engine set for increasing engine output when a predetermined output increase request requirement is met is no less than an acceleration torque (Ta) (S160), and a degree of input rotational acceleration (dNi) of an input shaft is less than an expected degree of rotational acceleration (dNiprd) corresponding to the difference obtained by subtracting the acceleration torque (Ta) from an engine torque (Te) outputted by the engine (S180-S200), an instruction is sent to an engine ECU to cancel the use of a torque request value (Treq) and setting a torque request value (Treq) corresponding to the output increase request requirement being met is prohibited (S210).
In order to prevent the current vibration or torque pulsation in the motor, a second setting value is set up such that the number of pulses included in ahalf cycle of the fundamental wave of the inverter output voltage is not less than the specified value.
The idling frequency deviation and the idling detection setting value are compared to output an idling detection signal, and, based on this idling detection signal, the torque correction amount of an ac motor is computed.
This torque wrench sets its numerical values with a hexagonal bar wrench. Prevents from setting error by the torque setting mechanism of the mechanical digital display. Precision ±3
This screwdriver features 21 adjustable torque settings, and the clutch function stops the motor to prevent the screwdriver from damage in the case it faces more torque than the set value.
The driving force controller for an electric vehicle includes a target torque setting means (5, 7, 8, 9, 10) which sets a target torque by restricting the upper limit of a basic target torque value on the basis of the basic target torque value and a motor torque corresponding to the maximum discharge power.
The target torque setting means has a base torque control means that controls the cranking base torque such that, when the engine's rotational frequency is at or below a prescribed engine rotational frequency, the cranking base torque is set to a first torque value, and such that, when the engine's rotational frequency is greater than the prescribed engine rotational frequency, the cranking base torque begins to decrease when the engine's pistons are positioned at the top dead center or in the compression stroke, and the cranking base torque reaches a second torque value that is less than the first torque value when the engine's pistons are positioned in the expansion stroke.
A work vehicle control apparatus is provided with: a generating electric motor control unit (160) that drives a generating electric motor (5) with excess electric power when regenerative electric power generated by an electric motor (7) at the time of regenerative braking exceeds allowable charge electric power of a capacitor (3); an engine controller (2) for detecting the rotation number of an engine (1); an electric motor control unit (180) that decreases regeneration torque produced by the electric motor when the engine rotation number exceeds a second setting value during the driving of the generating electric motor with the excess electric power; and a brake control unit (190) that increases braking torque produced by a hydraulic brake (30) when the engine rotation number exceeds the second setting value during the driving of the generating electric motor with the excess electric power.
Please refer to the following article about the settings values.
設定値については以下の記事をご覧ください。
This specifies the way the setting value should be compared.
設定値が比較されるように指定します。
Displays a subset of the key names used for setting values.
値の設定に使用するキー名のサブセットを表示。
Potentieel gevoelige of ongepaste informatie
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.