Vertaling van "total pm" in Pools
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
This is most appropriate when quantifying total PM masses that are less than 0,1 per cent of the sample medium's mass.
Metoda ta jest najodpowiedniejsza przy oznaczaniu ilościowym masy całkowitej cząstek stałych, która wynosi mniej niż 0,1 % masy samego nośnika.
If the total PM mass exceeds 400 μg, the filter face velocity may be reduced.
Jeżeli masa całkowita cząstek stałych przekracza 400 μg, prędkość na czole filtra może być zmniejszona.
However, it may not be appropriate when total PM masses exceed 1 per cent of the sample medium's mass.
Metoda ta może jednak być niewłaściwa, jeżeli masa całkowita cząstek stałych przekracza 1 % masy samego nośnika.
If the total PM mass on the filter exceeds 400 μg, the filter face velocity may be reduced to 0,50 m/s.
Jeżeli masa cząstek stałych na filtrze przekracza 400 μg, prędkość na wlocie filtra może być zmniejszona do 0,50 m/s.
Successive mass determinations of each reference PM sample media shall return the same value within ± 10 μg or ± 10 per cent of the expected total PM mass, whichever is higher.
Kolejne oznaczenia masy każdego nośnika odniesienia dla próbek cząstek stałych muszą dawać tę samą wartość w granicach ±10 μg lub ±10 % przewidywanej masy całkowitej cząstek stałych, w zależności od tego, która z tych wielkości jest większa.