Vertaling van "using telnet" in Pools
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
You should not do the upgrade using telnet, rlogin, rsh, or from an X session managed by xdm on the machine you are upgrading.
Nie powinno się przeprowadzać aktualizacji przez telnet, rlogin, rsh lub z sesji X zarządzanej przez xdm na maszynie, którą aktualizujesz.
You should not upgrade using telnet, rlogin, rsh, or from an X session managed by xdm, gdm or kdm etc. on the machine you are upgrading.
Nie należy wykonywać aktualizacji przy użyciu telnet, rlogin, rsh lub z sesji X zarządzanej przez xdm, gdm, kdm, itp. na aktualizowanym komputerze.
You should not upgrade using telnet, rlogin, rsh, or from an X session managed by xdm, gdm or kdm etc on the machine you are upgrading.
Ważna uwaga: Nie powinieneś dokonywać upgrade'u za pomocą programów: telnet, rlogin, rsh, ani sesji X zarządzanych przez xdm, gdm czy kdm na maszynie, którą aktualizujesz.
When the computers are connected using telnet connection mode, Radmin will display the 'Telnet' window (illustration).
Powiązane tematy Podczas połączenia komputerów w trybie Telnet w programie Radmin zostanie wyświetlone okno Telnet (ilustracja).
Alternatively, advanced users can control and monitor the projectors using Telnet.
When using Telnet or attempting to browse a computer outside the cluster from a cluster host, there is no response.
For example, if you have problems sending email messages over SMTP between two of your servers that are running Exchange 2000 Server, you can test the SMTP connectivity by using Telnet on the sending server to connect to port 25 on the destination server.
Jeśli na przykład występują problemy z wysyłaniem wiadomości e-mail przez protokół SMTP między dwoma serwerami z programem Exchange 2000 Server, można przetestować łączność SMTP za pomocą protokołu Telnet na serwerze wysyłającym, łącząc się z portem 25 na serwerze docelowym.
Q: What should I do when I cannot connect to foreign systems withhostnames using TELNET, FTP, and so on, but can only connect using IP addresses?
P:Co zrobić, jeżeli nie mogę nawiązać połączenia przy użyciu usług TELNET, FTP i innych, podając nazwy obcych systemów, natomiast połączenie udaje się na podstawie adresów IP?
Build applications in the.NET Framework to communicate with servers using Telnet, rsh, rlogin, or rexec.