3-Speed Selector Switch offers greater control over a wide range of fastening applications
El selector de 3 velocidades ofrece un mayor control en una amplia variedad de trabajos de sujeción
A selector switch enables the operator to alternate between the two firing modes.
Un selector le permite al tirador alternar entre los dos modos de disparo.
Working in parallel, these signals are controlled via our Selector Switch for greater ease of operation.
Trabajando en paralelo, estas señales se controlan mediante nuestro interruptor selector para facilitar el funcionamiento.
The Electronic Speed Selector Switch (A), a "rocker" switch located on the right console, sets the engine rpm.
El interruptor selector de velocidad electrónico (A), un interruptor basculante ubicado en la consola derecha, establece las revoluciones del motor.
P ush the selector switch down to the heat/froth function.
Push the selector switch up to the latte function.
Bus Selector Switch: Set to "1" position.
Interruptor de selección del bus: colóquelo en la posición "1".
Always be sure main power is shut off before changing the position of the Line Level Selector Switch.
Siempre asegúrese de cortar el suministro eléctrico antes de cambiar la posición del Selector de Línea. 36.
The Perko Dual Battery Selector Switch allows the addition of an extra battery for accessories.
El interruptor selector de batería dual de Perko permite la adición de una batería adicional para los accesorios.
Battery Selector Switch for 2 Batteries - Cup Mount; allows the addition of an extra battery for accessories
Interruptor selector de batería para 2 baterías - Montaje en taza; permite la adición de una batería extra para accesorios
Push the Battery Type Selector Switch until "WET" is displayed.
Empuje el interruptor selector de tipo de batería hasta que se muestre "WET" (húmeda).
Schneider Electric Harmony XB4 2 positions Screw Selector Switch NO, 550 mA 125 V dc, 6 A 120 V ac 22.5mm
Interruptor selector Schneider Electric 2 Posiciones Roscado, 550 mA a 125 V dc, 6 A a 120 V ac, Configuración NA/NC
The interior and exterior lights are manually changed using a keyed selector switch.
Las luces interiores y exteriores se cambian manualmente usando un selector codificado.