Vertaling van "Sensor-CASSY" in Spaans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The voltage of the generator is measured at input B of Sensor-CASSY.
La tensión del generador se mide a la entrada B del Sensor-CASSY.
Connect a coil to input A of Sensor-CASSY.
In particular, neither the force sensor nor Sensor-CASSY are protected against high voltage.
Ni el sensor de fuerza ni el Sensor-CASSY están protegidos contra altas tensiones.
The voltage source S of Sensor-CASSY is actually a pulse width-modulated analog output.
La fuente de tensión S del Sensor-CASSY es propiamente una salida analógica modulada en ancho de pulso.
The displays go out and the Sensor-CASSY is switched off.
Los indicadores se apagan y se desconecta el Sensor-CASSY.
Therefore some features of the Sensor-CASSY have been renounced.
In order to reduce the risk of damage from high voltage, the force sensor and the Sensor-CASSY should be earthed.
Para reducir el riesgo de daño por alta tensión, se debe poner a tierra al sensor de fuerza y al sensor CASSY.
Connect the voltage output of the supply unit to the input B of the Sensor-CASSY.
Conecte la salida de tensión de la unidad de servicio con la entrada B del Sensor-CASSY.
The temperature box at Sensor-CASSY input A measures the temperature of the sensor in the electric oven.
La temperatura de la sonda en el horno se mide desde la unidad temperatura conectada a la entrada A del Sensor-CASSY.
The current flows via input A of Sensor-CASSY and the capacitor voltage is measured at input B.
La corriente fluye a través de la entrada A del Sensor-CASSY y se mide la tensión del condensador a la entrada B.
The magnetic flux is calculated from the induction voltage U of the secondary coil, which is measured at Sensor-CASSY input B.
El flujo magnético flujo magnético se calcula de la tensión de inducción U de la bobina secundaria que se mide en la entrada B del Sensor-CASSY.
For your own protection, do not connect Sensor-CASSY to voltages over 100 V.
Por su propia seguridad no conecte el Sensor-CASSY con tensiones mayores de 100 V.
Plug one end of the connecting cable into the two inputs on the right of the relay R of the Sensor-CASSY and the other end into the push-button input of the piston burette.
Conecte el cable de conexión a las dos entradas derechas del relé R del Sensor-CASSY y por el otro lado a la entrada del pulsador de la bureta.