Vertaling van "test failure" in Spaans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Also, try to avoid small cutouts in the conductor, as they are more difficult to edge condition and could create areas for test failure.
Además, trate de evitar recortes pequeños en el conductor, ya que son más difíciles y podría crear zonas de falla en la prueba.
If you've deliberately changed existing behavior, this change might cause a regression test failure but not any actual regression.
Si ha cambiado de manera deliberada alguna conducta existente, este cambio puede causar una falla en la prueba de regresión pero no de regresión actual.
Now, in one quick glance, you can see the highest priority test failure for any song while reviewing your log.
Ahora, en una mirada rápida, se puede ver el fallo de la prueba de mayor prioridad para cualquier canción, mientras que revisa su registro.
Test Failure If the test fails, first try reprogramming the phone number and repeat the test.
Fallo de la prueba Si la prueba falla, pruebe a reprogramar el numero de teléfono y repita la prueba.
If you see any output that indicates a test failure, verify and correct problems with the relevant servers.
Si ve cualquier resultado que indica un error de prueba, comprobar y corregir problemas con los servidores correspondientes.
Test failure on Cygwin due to incorrect linkage flag (#2918)
Error de prueba en Cygwin debido a un indicador de vinculación incorrecto ( 2918)
In other words, a leak test failure usually means that something is wrong with the instrument, causing unusual leakage of the gas being measured.
En otras palabras, una falla en la prueba de fuga generalmente significa que algo está mal con el instrumento, lo que provoca una fuga inusual del gas que se está midiendo.
This can cause spark knock (detonation), engine overheating or emission test failure.
Esto puede provocar la chispa Knock (detonación), sobrecalentamiento del motor o falla en la prueba de emisiones.
Then if there is a difference then an test failure is reported.
Stressing the system test failure behaviour...
It cannot be assumed that the initial sterility test failure is a false positive.
If a subsequent test failure occurs, retesting cannot be done for at least seven days.
If the test has been carried out in a satisfactory manner, the cause of test failure shall be identified.
Si el ensayo no se ha realizado de forma satisfactoria, se identificará la causa de fallo del mismo.