Download for Windows Premium
Publiciteit
Command code 2709,3
Bedoelde u: Command code 2709,3

Examples with "Command code 2709,3" and their translation in Engels

We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Star Command code 2709,3 verbiedt me om ongekwalificeerd personeel in te zetten of in gevaar te brengen.
Star Command code 2709.3 forbids me from placing unqualified personnel in harm's way. Okay.
Cobalt is the command code om de evacte starten vanaf LA Basin.
Cobalt is the command code to initiate evac from the LA Basin.
Wat is de autolokaliserings code? - Command nul.
WHAT'S THE AUTO-LOCATE MACRO? COMMAND-ZERO.
Command [Code N] zal antwoorden met een SMS-bericht dat u eraan zal herinneren wat u kunt doen om de nummers te programmeren.
Command [Pw N?] will reply with an SMS that will remind you what you can do to program the numbers.
Daarna laat het LCD de RC5 of RC6 systeem- en command code zien, zowel decimaal als binair.
After then the LCD shows the RC5 or RC6 system- and command code in decimal as wel in binair.
Met behulp van het LCD is in te stellen welke RC5, RC5X of RC6 systeem- en command code er verzonden kan gaan worden.
With the help of the LCD you can adjust which RC5, RC5X or RC6 system- and command code must send out.
Door PORTA. laag te maken (S1 ingedrukt houden) wordt op bovenstaande manier niet de command code, maar het RC5 of RC6 systeem-adres ingesteld, dit systeem-adres wordt opgeslagen in EEPROM.
When PORTA. is connected to GND (keep S1 pressed), then changes not the command value, but the RC5 or RC6 system-address, the system-address will be stored in EEPROM.
Bijvoorbeeld, command [code JL2 0 1 4 24 N24 =r3 on s+31] naar de controller verbindt ingang L2 naar uitgang R4 softwarematig of virtueel door Junctie JL2 en schrijft de lokale commando's om uit te voeren wanneer de ingang (L2) verandert.
For example, command [Pw JL2 0 1 4 24 N24 =r4 on s+31] to the controller will virtually connect input L2 to output R4 with the Junction JL2 and write the local commands to be executed when the junction will trigger.
Als op een toets wordt gedrukt zendt een RC5-afstandsbediening een header, een togglebit, een extended (7e) command bit, een 5 bits systeem-code en een 6 bits command-code uit.
A push on a button from the RC5 remote-control sends: a header, a togglebit, an extended (7th) command bit, a 5 bit system-code and a 6 bit command code.
Star Command-code 2709.3... verbiedt dat ik onbevoegd personeel in gevaar breng.
Star Command code 2709.3 forbids me from placing unqualified personnel in harm's way.
Elk aspect van het gedrag van een Clone Trooper werd beheerst door de Command-code.
Every aspect of clone trooper behavior was governed by the Command Code.
Is de ontvangen systeem-code gelijk aan die in de EEPROM van de PIC dan wordt de command-code uitgevoerd.
When the received system-code is equal to the programmed one in the EEPROM from the PIC, then the command-code is executed.
De toegang code kan alleen verkregen worden via Starfleet Command.
The access code can only be obtained through Starfleet Command.
Er zijn geen resultaten gevonden voor deze term.

Synoniemen voor Command code 2709,3 in het Nederlands

Publiciteit

Resultaten: 122317. Exact: 0. Verstreken tijd: 316 ms.

Veel voorkomende woorden: 1-300, 301-600, 601-900

Frequente korte uitdrukkingen: 1-400, 401-800, 801-1200

Frequente lange uitdrukkingen: 1-400, 401-800, 801-1200