Type the HTTP Port number used by the server for console-to-server communication.
Geben Sie die HTTP-Port -Nummer ein, die der Server zur Konsole-zu-Server-Kommunikation verwendet.
If you are logging onto a server running on the local system, the HTTP Port field is automatically populated with the correct port number.
Wenn Sie sich bei einem Server auf dem lokalen System anmelden, wird das Feld HTTP-Port automatisch mit der korrekten Portnummer aufgefüllt.
The 'HTTP Port' field is empty.
Das Feld Http-Port ist leer.
Cannot access server. The server may be down or you may have specified an incorrect HTTP Port.
"Zugriff auf Server verweigert. Entweder wurde der Server heruntergefahren, oder Sie haben einen ungültigen HTTP-Port angegeben."
The HTTP Port specified on a remote console should be the same as the local console. Click OK.
Der HTTP-Port, der auf der remote -Konsole angegeben wurde, sollte mit dem der lokalen -Konsole übereinstimmen. Klicken Sie auf OK.
Enter the HTTP Port number that corresponds to the Server name you entered.
Geben Sie die Nummer des HTTP-Port ein, die dem Servernamen entspricht.
HTTP Port -this is the port that Precision LMS will use to listen for normal web requests, by default it is set to 8080.
HTTP-Port: Diesen Port verwendet Precision LMS, um auf normale Webanfragen zu warten. Der Standardport ist 8080.
Enter the appropriate ports in the HTTP Port and HTTPS Port fields.
Geben Sie die entsprechenden Ports in die Felder HTTP-Port und HTTPS-Port ein.
The LAN Port is the HTTP Port of your camera.
Der HTTP-Port ist der LAN-Port Ihrer Kamera.
You will be able to access your camera over this address once you Forwarded your Camera's HTTP Port.
Sie können über diese Adresse auf Ihre Kamera zugreifen, nachdem Sie den HTTP-Port Ihrer Kamera weitergeleitet haben.
The Name, IP Address, and HTTP Port fields are presented as a convenience.
Die Felder Name , IP-Adresse und HTTP-Port werden zur Unterstützung angeboten.
You may also change the default HTTP and HTTPS port numbers, if the Remote Console Switch has changed from the default on the serial console, by typing the new port numbers in the HTTP Port and HTTPS Port fields.
Sie können auch die HTTP- und HTTPS-Standard-Portnummern ändern, wenn die Remote Console Switch-Standardeinstellung an der seriellen Konsole geändert wurde. Geben Sie dazu in den Feldern HTTP-Port und HTTPS-Port die neuen Portnummern ein.
If you configured the KVM Switch to use non-default HTTP and HTTPS port numbers, type the new port numbers in the HTTP Port and HTTPS Port fields.
Wenn Sie den KVM-Switch so konfiguriert haben, dass nicht standardmäßige HTTP- und HTTPS-Portnummern verwendet werden können, geben Sie die neuen Portnummern in die Felder für HTTP-Port und HTTPS-Port ein.