You can allocate a colour and icon to your logic program.
Every logic program can contain a control command and a status text.
Jedes Logikprogramm kann einen Steuerbefehl und einen Statustext beinhalten.
Next, open the logic program using the button "edit".
The control command is intended to activate and deactivate the logic program via the object panel.
Der Steuerbefehl ist dafür gedacht um das Logikprogramm über das Objectpanel zu aktivieren bzw. zu deaktivieren.
This has the advantage that you do not always have to have the logic program open to change a value.
Dies hat den Vorteil, dass Du nicht immer das Logikprogramm öffnen musst um den Wert zu ändern.
The first thing to do is open the app "logic" and create a logic program via "add program".
Als erstes öffnest Du die App Logik und erstellst über "Programm hinzufügen" ein Logikprogramm.
If not, open the logic program and select the item "edit logic" in the parameter panel.
Wenn nicht öffne das Logikprogramm und wähle im Parameterpanel im Punkt „Logik editieren" den Button „editieren" aus.
To create a logic program, open "logic" and select "add program".
Um ein Logikprogramm zu erstellen, öffne die Logik und wähle „Programm hinzufügen".
Next, create a logic program in the app "logic" using "add program".
Danach erstellst Du ein Logikprogramm in der App „Logik" mit „Programm hinzufügen".
To import a logic program, click on the button "import" (directly under the "export" button).
Um ein Logikprogramm zu importieren, musst Du den Button „Importieren" (direkt unter dem Button „exportieren" wählen.
Each logic program allows you to define in- and outputs, which are shown in the linkpanel of a program.
Du kannst für jedes Logikprogramm In- und Outputs definieren, welche Dir im Linkpanel deines Programms angezeigt werden.
Create To create a logic element, you must first be located in the logic program.
Erstellen Um ein Logikelement zu erstellen, musst Du dich zuerst im Logikprogramm befinden.
To define an in- or output for your logic program, select a data element and change the type to "Input" or "Output".
Um einen In- oder Output für ein Logikprogramm festzulegen, musst Du einen Datenbaustein auswählen und den Typ von "Intern" auf "Input" oder "Output" ändern.