Traduction de voix, fonctionnalités offline, synonymes, conjugaison, jeux éducatifs
Publicité
Rejoignez Reverso, c'est gratuit et rapide !
fine thread
Traduction de "fine thread" en chinois
细线
细螺纹
微小的联系
A larger cross-section of the fine thread will compensate for the decreasing fatigue life.
增加细牙螺纹的横截面面积，对疲劳寿命的降低可以起到弥补作用。
Through the use of a fine thread, when the plug housing 17 is screwed into the receptacle opening 15, high axial pressure forces that are transmitted from the plug housing onto the other components of the plug unit 5 are generated even with low rotational moments.
通过使用细牙螺纹，可以在将插头壳体17拧入插口15中时已经用小力矩产生大的轴向压力，该轴向压力由插头壳体传递至插头单元5的其余组成部分。
The artisan used needles to knit a delicate lace shawl with fine thread.
工艺师用针把细线织成了一条精致的蕾丝披肩。
The eye of a needle needs to be wide enough for fine thread.
针眼得足够宽，才能通过细线。
From the exterior design of the dies on the control and reduction of the deformation the dies thickness E can not be too thin, especially the fine thread the dies thickness not less than 12 pitch.
（1）从板牙外形设计上控制和减少变形 板牙厚度E不能太薄，特别是细牙螺纹板牙厚度不能小于12个螺距。
That fine thread is our humanity.
这一微小的联系就是我们的人性。
There is a common and fine thread that runs through the fabric of all civilizations.
在所有文明的结构中有着一个共同和微小的联系。
The artisan showed expertise in spinning, producing fine thread quickly.
这位手艺人精通纺纱，能很快纺出细而均匀的线。
Unification of fine thread products is limited to sizes 1 in. and under.
细螺纹产品的统一限于 1 英寸或更小的尺寸内。
Each square centimetre of the fabric is embroidered with fine thread for detail.
布料上几乎每一平方厘米都绣满了精细的纹样。
Her delicate petticoat was woven with fine thread, enhancing the dress's elegance.
她那条做工精细的衬裙用细纱织成，更衬托出整条裙子的高雅气质。
On average, the effectiveness lasts for around 8-10 years, greater effectiveness and much more lasting than popular fine thread lift, feather lift, liquid lift that are commercially available.
效果平均可维持8~10年左右，比目前市面上流行的埋线拉提、羽毛拉提、液态拉皮效果都来得更好且持久。
Synonymes et analogies de "fine thread" en anglais
Le mot et l’expression du jour
L’image du jour
Suggestions qui contiennent fine thread
Résultats: 28. Exacts: 28. Temps écoulé: 14 ms.
