Each tube shall be tested after the finish heat treatment following the final cold-drawn pass by passing through a nondestructive tester capable of detecting defects on the entire cross section of the tube, in accordance with Specification A 450/A 450M.
각 관은 명세 A 450/A 450M에 따라 검출 가능하던 비파괴적인 검사자를 통과해서 따른 끝 열처리가 배반한 마지막 냉각 압연 통행을 관의 전체 단면에 후에 시험될 것입니다.
Spezilla's high purity seamless stainless steel tubing is precision cold-drawn and manufactured according to ASTM A213/A269 using the finest pre-materials with the specific purpose of servicing semiconductor and related industries and other clean processes.
Spezilla의 높은 순수성 이음새가 없는 스테인리스 배관은 반도체 및 관련 기업 및 다른 청결한 과정 서비스의 특정한 목적을 가진 가장 정밀한 전 물자를 사용하여 ASTM A213/A269에 따라 냉각 압연 그리고 제조 정밀도입니다.
The cold-drawn finished product has high precision and good surface quality.
냉간 압연 완제품은 정밀도가 높고 표면 품질이 좋습니다.
Aluminum alloy cold-drawn frame or plastic steel frame is used all around.
알루미늄 합금 냉간 압연 프레임 또는 플라스틱 스틸 프레임이 사용됩니다.
Precision: common extruded, precise (which needs further processing, such as cold-drawn and rolling after extrusion).
정밀도: 일반적인 압출, 정밀 (압출 후 냉간 압연 및 압연과 같은 추가 처리가 필요함).
1.1 Minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat
1.1 최소한 벽 간격, 관 열을 위한 이음새가 없는 냉각 압연 낮 탄소 강철 관
Carbon steel seamless Boiler Tube, ASTM A179, Min. Wall Thickness, low carbon steel, cold-drawn tube
탄소 강철 이음새가 없는 보일러관, ASTM A179의 사소 벽 간격, 낮은 탄소 강철, 냉각 압연 관
]]>Boiler tubes refers to hollow round section steel that is used in manufacturing heat transfer unite, ASTM A179/ASME SA179 specification is designed as American standard of Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes.
]]>보일러 관은 연합 제조 열전달에 사용되는 라운드 형강 중공 지칭, ASTM A179/ ASME SA179 사양이 원활한 미국 표준으로 설계되어 저탄소 철강 열 교환기 및 콘덴서 튜브 냉간 압연.
ASTM A199/A199M-92 Specification for Seamless Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger tubes and Condenser Tubes.The ASTM A119 pressure boiler tube is wrapped with nylon fabric then bundled with 2 steel strips in each end, and other 2 in the middle.
이음새가 없는 냉각 압연 중간 합금 강철 열 교환기 관과 콘덴서 Tubes.The ASTM A119 압력 보일러관을 위한 ASTM A199/A199M-92 명세는 나일론 직물 감싸이고 그 후에 각 끝에 있는 2개의 강철 지구도, 및 중앙에서 다른 2로 묶입니다.
Small-scale titanium materials, thin titanium plates, titanium strips, small-diameter or special-shaped titanium tubes, various cold-rolled and cold-drawn titanium materials, and expensive and corrosive metal products can be stored and placed in the warehouse.
소규모 티타늄 재료, 얇은 티타늄 플레이트, 티타늄 스트립, 작은 직경 또는 특수 모양의 티타늄 튜브, 다양한 냉간 압연 및 냉간 그려진 티타늄 재료, 고가의 부식성 금속 제품을 창고에 보관하고 배치 할 수 있습니다.
The alloy with nickel content close to 50.0at%, fully cold-drawn deformation (>35%) and aging at 673Kcan obtain nearly 7% nonlinear superelasticity.
니켈 함량이 50.0at에 가까운 합금, 완전히 냉간 변형 (>35%) 673K에서 노화는 거의 7% 비선형 초탄성을 얻을 수 있습니다.
This network is the use of modified plastic composite plastic-coated high-strength cold-drawn steel wire, woven through the upper and lower weldin... Anyang City is Talon LLC
이 네트워크는 네트워크 구조를 형성하기 위해 위턱과 아래턱에 용접을 통해 만들어내는 수정된 플라스틱 복합 플라스틱 코팅 고강도 냉간 끄는 강선의 사용이다.
TP316/316L 1/2' X 0.065' X 20FT Polished High Purity Seamless Stainless Steel Tubing Features: Spezilla's high purity seamless stainless steel tubing is precision cold-drawn and manufactured according to ASTM... Read More
TP316/316L 1/2" X 0.065"는 X 20FT 높은 순수성 이음새가 없는 스테인리스 배관을 닦았습니다 특징: Spezilla의 높은 순수성 이음새가 없는 스테인리스 배관은 반도체 및 관련 기업 및 다른 청결한 과정 서비스의 특정한 목적을 가진 가장 정밀한... Read More