This example shows the effects of using boundary blend control points.
이 예제는 경계 블렌드 제어점 사용의 효과를 보여줍니다.
The following figure shows a blended surface created without control points.
다음 그림은 제어점 없이 생성된 블렌드 서피스를 보여줍니다.
Interpolates a point between two control points based on a distance.
거리를 기준으로 두 기준점 사이에 점을 보간합니다.
Interpolates a point at a specified elevation between two control points.
두 기준점 사이의 지정된 표고에 점을 보간합니다.
This method is useful for setting effect control points.
이 메서드는 효과 조절점을 설정할 때 유용합니다.
This option allows you to adjust the control points on the camera path.
이 옵션을 사용하면 카메라 경로에서 제어점을 조정할 수 있습니다.
Use this command to fine-tune curves with many control points.
이 명령을 사용하여 많은 제어점을 가진 커브를 세밀하게 편집합니다.
You can drag all the other control points on the follower curve freely.
종동체 커브에서 다른 모든 제어점을 자유롭게 드래그할 수 있습니다.
You select specific calibration and control points for each map that you digitize.
디지타이즈하는 각 지도에 대한 특정 교정점 및 기준점을 선택합니다.
If all cross section control points are scaled, the mesh bulges uniformly.
모든 횡단면 제어점의 배율을 조정하면 메시가 균일하게 벌지됩니다.
These options provide additional methods of selecting the control points.
다음 옵션은 제어점을 선택하기 위한 추가 방법을 제공합니다.
If required, click to define the curves using control points.
필요한 경우 을 클릭하여 제어점을 사용하여 커브를 정의합니다.
Sets the number of control points used to rebuild the selected curves.
선택된 커브를 재생성하는 데 사용되는 제어점의 개수를 설정합니다.