Policy configuration redundant hardware components - Data Mover failover policies
정책 구성 중복 하드웨어 구성요소 - Data Mover 페일오버 정책
Which recovery method is used after a Data Mover failover?
Data Mover 페일오버 후 사용하는 복구 방법은 무엇입니까?
It is recommended that you periodically test the functionality of the Data Mover failover configuration.
Data Mover 페일오버 구성 기능은 정기적으로 테스트하는 것이 좋으며
The following are the three failover policies from which you can choose when you configure Data Mover failover
DM 페일오버 구성 시 선택할 수 있는 세 가지 페일오버 정책 유형은 다음과 같습니다.
The failover policy type determines the action that occurs in the event of a Data Mover failover.
페일오버 정책 유형에 따라 DM(Data Mover) 페일오버 이벤트에 적용될 조치가 결정됩니다.
You will also test the functionality of Data Mover failover that you configured in Lab 1. (Note
실습 1 에서 구성한 Data Mover 의 페일오버 기능도 테스트하게 됩니다. (주
During a Data Mover failover, any FTP sessions that were active when the failure occurred are automatically disconnected.
Data Mover 페일오버 중에는 장애 발생 당시 활성이었던 FTP 세션이 자동으로 연결 해제됩니다.
In the event of a Data Mover failover, DART uses a metadata logging facility to recover within seconds or minutes.
한쪽 Data Mover에 장애가 발생할 경우 DART는 메타 데이터 로깅 기능을 이용하여 몇 초 또는 몇 분 안에 복구합니다.
Although Data Mover failover provides fault-tolerance in the case of Data Mover failure, this feature provides no redundancy in the case of cable or switch port failure.
Data Mover 페일오버는 Data Mover 장애 시에 내결함성을 제공하지만 이 기능은 케이블 또는 스위치 포트 장애 시 이중화 상태를 제공하지 않습니다.
In this lab you will examine the components of your Data Mover to determine if they are compatible for Data Mover failover.
이 실습에서는 Data Mover 의 구성요소를 검사하여 Data Mover 페일오버에 대해 호환성이 있는지를 판단합니다.
Test Data Mover failover periodically/regularly e.g. Quarterly
Data Mover 페일오버를 정기적으로 테스트 (예: 분기마다)
After verifying that the standby Data Mover is free from any configurations and that the hardware matches that of the primary, follow the steps below to configure Data Mover failover.
Standby DM(Data Mover) 이 다른 모든 구성과 연결되어 있지 않고 하드웨어가 Primary DM 하드웨어와 일치하는지 확인한 후에 아래 단계에 따라 DM 페일오버를 구성합니다.
Highly available cluster of 2 to 14 independent Data Movers with n+1 active/standby Data Mover failover
2~14개의 독립적 Data Mover와 장애 복구 기능을 위한 n+1개의 액티브/스탠바이 Data Mover로 구성된 고가용성 클러스터
Contenu potentiellement sensible ou inapproprié
Les exemples vous aident à traduire le mot ou l’expression cherchés dans des contextes variés. Ils ne sont ni sélectionnés ni validés par nous et peuvent contenir des mots ou des idées inappropriés. Signalez des exemples à modifier ou à retirer. Les traductions potentiellement sensibles, inappropriées ou familières sont généralement marquées de rouge ou d’orange.