Traduction de "m/s" en coréen
Nous n’avons pas trouvé cette entrée. Affichage de résultats approximatifs. Vérifiez l’orthographe ou proposez d’ajouter ce terme au dictionnaire.
Based on effective sunshine 5 hours every day; average wind speed over 2.5 m/s
효과적인 햇빛에 매일 5 시간 기초를 두는; 2.5 m/s 이상 평균 풍속
In fact, the velocity is changing by a constant amount - 10 m/s - in each second of time.
사실, 속도는 일정한 양에 의해 변경됩니다 - 10 m/s - 시간의 각 초.
However, measurement is disturbed by all phenomenon which destroys the capillary waves: rain, very weak winds or strong winds (higher than 20 m/s).
그러나, 측량은 표면 장력파를 파괴하는 모든 현상에 의해 교란된다: 비, 아주 약한 바람 또는 강풍 (20 높이 보다 m/s).
It equipped with attached accessories such as sunshade, rainproof, pillow, hip heel strap, elasticity body heel strap (M/S) and table board.
차양, 방수, 베개, 힙 힐 스트랩, 탄성체 힐 스트랩 (M/ S) 및 테이블 보드와 같은 액세서리가 부착되어 있습니다.
The major advantages are the very high velocity (≈20 m/s) of the ink droplets, which allows for a relatively long distance between print head and substrate, and the very high drop ejection frequency, allowing for very high speed printing.
중요한 이점은 인쇄 머리와 기질 사이 상대적으로 장거리를 허용하는, 잉크 작은 물방울의 아주 높은 각측정속도 (≈20 m/s)와 아주 높은 하락 방출 빈도이어, 고속 인쇄를 아주 허용하.
With a traverse speed of up to 10 m/s, our real-time-capable position measurement systems provide optimal position feedback, even in high-dynamic applications.
발루프의 실시간 거리 측정 시스템은 10 m/s에 달하는 처리 속도로 고속으로 진행되는 동적인 작업에서도 최적의 위치 피드백을 제공합니다.
This heavy duty transducer/ converter has a sealed housing and a 24 cord terminating in a m/s connector.
이 헤비 듀티 변환기/ 컨버터에는 밀폐 된 하우징과 m/ s 커넥터로 끝나는 24 코드가 있습니다.
Speed display:: To display the velocity during test (m/s), and will automatic reset for another test
속도 전시:: 시험 (m/s) 도중 각측정속도를 표시하는 것은, 다른 시험을 위한 자동적인 리셋
Impact resistance: X, Y, Z three axial impose the peak speed is 300 m/s, for the duration of the impact is 6 ms, without any damage and injury.
충격 저항: x, Y, 축 Z 3는 최고봉 속도를입니다 300 m/s 부과합니다, 왜냐하면 충격의 내구는 어떤 손상 및 상해도 없이 6 Ms, 입니다.
First of all, draw a horizontal line, and cut off AB equal to 14.4 m/s to some suitable scale to represent the velocity of the blade.
먼저 수평선을 그리고 14.4 m/s에 해당하는 AB를 블레이드의 속도를 나타내는 적절한 눈금으로 잘라냅니다.
c, Welding worker as far as possible in indoor, environment wind speed should be 0.5 m/s or less, avoid affected by cross ventilation.
c, 용접 작업자, 실내 환경 바람 속도에 최대한이 0.5 m/s 또는, 하지 않도록 해야 교차 하는 환기에 의해 영향을 받는.
Computer remote monitoring and upgrading 0-5 m/s CIJ high speed inkjet printer
컴퓨터 원격 감시 및 0-5 m/s CIJ 고속 잉크젯 프린터를 격상시키기
Able to work under loads of up to 10 MPa, and speeds up to 2.5 m/s
10까지 MPa의 짐의 밑에 일할 수 있습니다, 2.5 m/s에 가속화합니다