After you create the metric snapshot, the Create Metric Snapshot page appears with available data and calculated thresholds in the Metric data table. You can then perform the following tasks
측정 단위 스냅샷을 생성하면 사용 가능한 데이터와 계산된 임계값이 측정 단위 데이터 테이블에 표시된 상태로 측정 단위 스냅샷 생성 페이지가 나타납니다. 그러면 다음과 같은 작업을 수행할 수 있습니다.
Once the Low Value and High Value columns are populated in the Metric data table, the percentages will be used against the metric snapshot value to calculate suggested thresholds for the metric.
[측정 단위 데이터] 테이블에서 [하한값] 및 [상한값] 열이 채워지면 백분율이 측정 단위에 대해 제안되는 임계값을 계산하기 위해 측정 단위 스냅샷 값에 사용됩니다.
Once you edit the metric snapshot and click Go, the Edit Metric Snapshot page reappears with available data in the Metric data table. You can then perform the following tasks
측정 단위 스냅샷을 편집하고 실행을 누르면 사용 가능한 데이터가 측정 단위 데이터 테이블에 표시된 상태로 [측정 단위 스냅샷 편집] 페이지가 다시 나타납니다. 그러면 다음과 같은 작업을 수행할 수 있습니다.
Use the View Metric Baseline page to display the pertinent information regarding the metric baseline. If the Warning Threshold or Critical Threshold column entries are blank in the Metric data table, then there was no metric data available from which thresholds could have been calculated.
[측정 단위 기준 요소 보기] 페이지에서는 측정 단위 기준 요소와 관련된 정보를 표시할 수 있습니다. 측정 단위 데이터 테이블에서 경고 임계값 또는 위기 임계값 열의 항목이 비어 있으면 해당 임계값 계산에 사용되었을 수 있는 측정 단위 데이터가 없는 것입니다.
Autres résultats
This table describes the metrics in the Data Source Metrics table
이 표에서는 [데이터 소스 측정 단위] 테이블의 측정 단위에 대해 설명합니다.
Click Table View to drill down to more detailed metric data.
테이블 보기를 누르면 보다 자세한 측정 단위 데이터로 드릴 다운됩니다.
When the user selects a Taskflow in the tabular view, the Detail section shows a chart that allow you to compare related metrics for the selected time interval. For each chart, you can choose the Table Data link to view the actual metric data.
사용자가 표 형식 보기에서 작업 흐름을 선택하면 세부 정보 섹션에 선택한 시간 간격 동안 관련 측정 단위를 비교할 수 있는 차트가 표시됩니다. 각 차트에 대해 실제 측정 단위 데이터를 보려면 테이블 데이터 링크를 선택하십시오.
This supplement provides additional data tables to support the main article.
이 부록에는 본문 기사를 뒷받침하는 추가 데이터 표가 실려 있다.
You can select data tables and entries as described in.
에 설명된 대로 데이터 테이블 및 항목을 선택할 수 있습니다.
This area shows thumbnails of all reports based on the data table.
이 영역에는 데이터 테이블을 기반으로 하는 모든 보고서의 썸네일이 표시됩니다.
Otherwise the flange type is specified within standard data table.
켜져 있지 않은 경우 표준 데이터 테이블에서 플랜지 유형이 지정됩니다.
Changes to the data table schema are applied to all existing entries.
데이터 테이블 스키마에 대한 변경 내용은 모든 기존 항목에 적용됩니다.
You can edit this field after the data table is created.
데이터 테이블이 작성된 후 이 필드를 편집할 수 있습니다.
Contenu potentiellement sensible ou inapproprié
Les exemples vous aident à traduire le mot ou l’expression cherchés dans des contextes variés. Ils ne sont ni sélectionnés ni validés par nous et peuvent contenir des mots ou des idées inappropriés. Signalez des exemples à modifier ou à retirer. Les traductions potentiellement sensibles, inappropriées ou familières sont généralement marquées de rouge ou d’orange.