Mount the NIC onto the PCI bracket using the provided screws, and plug the cable between the NIC and the designated port on the motherboard.
제공된 드라이버를 사용하여 PCI 브래킷에 NIC를 장착하고 마더보드의 지정 포트와 NIC를 연결하는 케이블을 꽂습니다.
Low Profile 5.73 inches long, measured without PCI bracket
로우 프로파일, 길이 5.73인치(PCI 브래킷 미포함 시)
(Optional) Perform the following steps to replace the PCI bracket.
(선택 사항) PCI 브래킷을 교체하려면 다음 단계를 수행합니다.
Form factor: Low-profile, 5.73 inches long, measured without PCI bracket
폼 팩터: 로우 프로파일, 길이 5.73인치(PCI 브래킷 미포함 시)
The steps outlined in this document should be followed when installing the Intel RMM NIC into an Intel Server Chassis SR1500, SR1550, SR2500, SC5400, SC5299-E, or any chassis that requires the use of the PCI bracket to mount the Intel RMM NIC.
인텔 서버 섀시 SR1500, SR1550, SR2500, SC5400, SC5299-E 또는 인텔 RMM NIC를 마운트하기 위해 PCI 브래킷을 사용해야 하는 모든 섀시에 인텔 RMM NIC를 설치하는 경우 이 문서에서 설명하는 단계를 따라야 합니다.
Contenu potentiellement sensible ou inapproprié
Les exemples vous aident à traduire le mot ou l’expression cherchés dans des contextes variés. Ils ne sont ni sélectionnés ni validés par nous et peuvent contenir des mots ou des idées inappropriés. Signalez des exemples à modifier ou à retirer. Les traductions potentiellement sensibles, inappropriées ou familières sont généralement marquées de rouge ou d’orange.