Exemples avec "read or write cache" et leurs traductions en coréen
Nous n’avons pas trouvé cette entrée. Affichage de résultats approximatifs. Vérifiez l’orthographe ou proposez d’ajouter ce terme au dictionnaire.
If the requested data is not currently in READ or WRITE Cache, the data will be retrieved from the appropriate disk drives.
요청한 데이터가 현재 읽기 또는 쓰기 캐시에 없는 경우 데이터를 해당 디스크 드라이브에서 검색합니다.
If this meant that each request required access to the disk-based Access Logix database, the lookups would slow the storage system significantly; accordingly, the database is cached in SP memory (not in read or write cache), and operations are fast.
이것이 요청이 있을 때마다 디스크 기반 Access Logix 데이터베이스를 액세스해야 한다는 의미라면, 조회 작업으로 인해 스토리지 시스템이 상당히 느려질 것입니다. 이 때문에 데이터베이스가 SP 메모리 (읽기 또는 쓰기 캐시가 아님) 에 캐싱되며 따라서 작동이 빨라질 수 있습니다.
Note Prefetch properties are unavailable for a RAID 3 LUN because it uses the RAID 3 memory partition instead of the read or write cache memory partitions.
참고 RAID 3 LUN은 읽기 또는 쓰기 캐시 메모리 파티션 대신 RAID 3 메모리 파티션을 사용하기 때문에 RAID 3 LUN에는 속성을 사용할 수 없습니다.
Page Size Size of a page in Kbytes (KB) of the SP's read or write cache.
페이지 크기 SP 읽기 또는 쓰기 캐시의 페이지 크기 (KB) 입니다.
Autres résultats
Your next action depends on whether you assigned memory to the read-cache or write-cache memory partitions.
다음 작업은 읽기 캐시 또는 쓰기 캐시 메모리 파티션에 메모리를 할당했는지 여부에 따라 달라집니다.
Setting LUN read cache or write cache properties
LUN 읽기 캐시 또는 쓰기 캐시 속성 설정
However, it is possible to have random read requests come from either the read cache or the write cache, due to the locality of the workload.
그러나 작업 로드의 지역성으로 인해 읽기 캐시나 쓰기 캐시에서 임의 읽기 요청을 생성할 수 있습니다.
In this mode, Qtier constantly monitors I/O activity and keeps active data that requires small, mostly-random, read/write operations in SSD Read-only or Read-write cache and other data in the tiered storage automatically moving data between the appropriate tiers.
이 모드에서, Qtier은 지속적으로 I/O 활동을 모니터링하면서 SSD 읽기 전용 또는 읽기-쓰기 캐시에서, 작고 대체로 무작위적인 읽기/쓰기 작업이 필요하며 자주 사용되는 데이터와 계층화된 스토리지에 있는 데이터를 계속해서 적절한 계층으로 자동으로 이동시킵니다.
Zero out the Read and Write cache settings and Click Apply.
읽기 및 쓰기 캐시 설정을 제거하고 적용 을 클릭합니다.
Much of that performance is related to efficient use of read and write cache, and this section discussed the mechanisms used.
성능의 상당 부분은 읽기 및 쓰기 캐시를 효율적으로 사용하는 것과 관련이 있으므로 여기에 필요한 메커니즘에 대해 논의했습니다.
Cache page size applies to both read and write caches.
캐시 페이지 크기는 읽기 캐시와 쓰기 캐시 둘 다에 적용되며
Disable read and write cache for your primary storage system.
다음 명령을 실행하여 운영 스토리지 시스템의 읽기 및 쓰기 캐시를
Re-enable read and write cache using the following command
다음 명령을 사용하여 읽기 및 쓰기 캐시를 다시 활성화합니다.
Contenu potentiellement sensible ou inapproprié
Les exemples vous aident à traduire le mot ou l’expression cherchés dans des contextes variés. Ils ne sont ni sélectionnés ni validés par nous et peuvent contenir des mots ou des idées inappropriés. Signalez des exemples à modifier ou à retirer. Les traductions potentiellement sensibles, inappropriées ou familières sont généralement marquées de rouge ou d’orange.