Télécharger pour Windows Premium
Publicité
threads per inch

Traduction de "threads per inch" en coréen

Nous n’avons pas trouvé cette entrée. Affichage de résultats approximatifs. Vérifiez l’orthographe ou proposez d’ajouter ce terme au dictionnaire.
인치당 스레드
인치당 나사
Q indicates that column E is threads per inch (TPI).
Q E 열이 TPI(인치당 스레드)임을 나타냅니다.
Specifies the threads per inch (TPI) value.
TPI(인치당 스레드) 값을 지정합니다.
NPT and BSP thread pitches (threads per inch, TPI) are listed below.
NPT 및 BSP 스레드 피치 (인치당 스레드 수, TPI)는 다음과 같습니다.
The screw pitch is the inverse of the threads per inch.
나사 피치는 인치당 스레드의 역과 같습니다.
Faber type thread uses a four threads per inch design.
Faber 유형 실은 인치 디자인 당 4개의 실을 이용합니다.
Metzke-type thread uses a four threads per inch design and more robust 90º tool joint mating surface.
Metzke 유형 실 용도 인치 디자인과 더 튼튼한 90º 공구 합동 짝지어주는 표면 당 4개의 실.
Use 30 threads per inch (12 threads per cm) for printing flash ink.
저속한 잉크 인쇄를 위해 인치 (cm 당 12의 실) 당 30의 실을 이용하십시오.
Number of threads per inch.
인치/스레드의 수.
Use 85 threads per inch monofilament polyester screen printing mesh (34 threads per centimeter) for heavy coverage on dark shirts, solid under-base prints, puff, metallic, and shimmer inks, and transfer printing.
사용 85는 어두운 셔츠에 무거운 적용을 위한 인치 모노필라멘트 폴리에스테 스크린 인쇄 메시 (센티미터 당 34의 실) 당, 단단한의 밑에 기초 인쇄, 분첩, 금속의, 및 희미한 빛 잉크 및 이동 인쇄 실을 뀁니다.
The standard designation for an UTS thread is a number indicating the nominal (major) diameter of the thread, followed by the number of threads per inch (e.g. 3/8 - 12).
UTS 나사 표준 명칭은 나사의 명목/주요 직경을 나타내는 숫자와 인치 당 나사 수로 이루어 집니다(예: 3/8 - 12).
If you use English units, the pitch is equal to 1 divided by the number of threads per inch.
영국식 단위를 사용하는 경우 피치는 1을 인치당 스레드 수로 나눈 것과 동일합니다.
The old domestic thread mark is RC The external thread is r, the metric thread is represented by pitch, and the American British thread is represented by the number of threads per inch.
기존 국내 나사산 표시는 RC 외부 나사산은 r, 미터법 나사산은 피치, 미국 영국산 나사산은 인치당 나사 수로 표시됩니다.
Although, this material is often available in national coarse (UNC) thread pitches, if being used in traditional applications, threads are specified 8 threads per inch (tpi) for diameters above one inch.
비록이 재료는 종종 UNC (National Coarse) 나사산 피치로 구할 수 있지만, 전통적인 응용 분야에서 사용되는 경우 나사산은 1 인치 이상의 직경에 대해 인치당 8 개의 나사산 (tpi)으로 지정됩니다.
Aucun résultat pour cette recherche.
Passez à Premium pour accéder à des millions d’exemples de traduction, enregistrer et apprendre du vocabulaire en illimité, le tout sans publicité.

Synonymes et analogies de "threads per inch" en anglais

Le mot et l’expression du jour
L’image du jour
chest: box with a flat top and a storage space inside
Découvrir le mot
Publicité

Résultats: 16. Exacts: 16. Temps écoulé: 10 ms.