You can add cables to a bundle after they are routed.
경로설정된 후 케이블을 번들에 추가할 수 있습니다.
Specifies a minimum bend radius to be assigned to a bundle.
번들에 지정할 최소 벤드 반지름을 지정합니다.
If you add items to a bundle and the diameter exceeds the maximum value specified for the bundle, a warning message is given and the wires are added to the bundle.
번들에 항목을 추가하고 지름이 번들에 지정된 최대 값을 초과할 경우 경고 메시지가 나타나며 번들에 와이어가 추가됩니다.
You must add cables to a bundle after you have added them to the routing set and before you begin to route.
경로설정 세트에 케이블을 추가한 후, 경로설정을 시작하기 전에 번들에 케이블을 추가해야 합니다.
Specifies a bundle thickness to be assigned to a bundle.
번들에 지정할 번들 두께를 지정합니다.
If this parameter is set for a sheath spool, it is overridden by any linestyles assigned to a bundle.
이 매개변수를 외장 스풀에 설정할 경우 번들에 지정된 선 유형으로 재정의됩니다.
You can add cables to a bundle after they are routed or create the bundle as unrouted, add the cables to it, and then route the bundle (and all its cables) at once.
케이블을 경로설정한 다음 번들에 추가할 수도 있고 경로설정되지 않은 상태로 생성한 번들에 케이블을 추가한 다음 번들과 모든 케이블을 한꺼번에 경로설정할 수도 있습니다.
Packing: 13 kgs Net per coil then 10 coils to a bundle.
포장: 코일 당 그물 13 킬로그램 그 후에 뭉치에 10의 코일.
This step can fail if you try to install an enabler without also upgrading the storage system software to a bundle that supports that enabler.
Enabler를 지원하는 번들에 스토리지 시스템 소프트웨어를 업그레이드하지 않고 Enabler를 설치할 경우, 이 단계를 수행할 수 없습니다.
This failure may happen while installing an enabler without updating the storage system software to a bundle that supports the enabler.
Enabler를 지원하는 번들로 스토리지 시스템 소프트웨어를 업데이트하지 않고 Enabler를 설치하면 이러한 장애가 발생할 수 있습니다.
Contenu potentiellement sensible ou inapproprié
Les exemples vous aident à traduire le mot ou l’expression cherchés dans des contextes variés. Ils ne sont ni sélectionnés ni validés par nous et peuvent contenir des mots ou des idées inappropriés. Signalez des exemples à modifier ou à retirer. Les traductions potentiellement sensibles, inappropriées ou familières sont généralement marquées de rouge ou d’orange.