The distance between upper and lower blade can be adjusted precisely.
Mold moving adopts advanced synchronous upper and lower mechanical drive system.
형 움직이는 것은 진보된 동시 위와 더 낮은 기계적인 드라이브 시스템을 채택합니다.
It can also install in the upper and lower double lifting equipment workshop.
또한 상부 및 하부 이중 리프팅 장비 작업장에 설치할 수 있습니다.
Both of the upper and lower drilling heads are working automatically.
The upper and lower tolerance values are independent.
Middle band - calculated as the average of the upper and lower band.
The originality of using upper and lower floating clamps.
위와 더 낮은 뜨 죔쇠 사용의 독창성.
Usually the workpiece is clamped between the upper and lower pads.
보통 제품은 위와 더 낮은 패드 사이에서 죄집니다.
Use a section view to visually check the upper and lower boundaries of a room.
단면뷰를 사용하여 룸의 상위 및 하위 경계를 시각적으로 확인합니다.
Adjust the distance between the upper and lower cutter shafts to accommodate different thickness plates.
다른 간격 판을 수용하기 위하여 위와 더 낮은 절단기 갱구 사이 거리를 조정하십시오.
Points of intersection with the silhouette curve split the loop into upper and lower chains.
실루엣 커브를 갖는 교차점은 루프를 상위 및 하위 체인으로 분할합니다.
If the upper and lower bushes are excessively worn, they should be replaced in time.
상부 및 하부 부시가 과도하게 마모되면 적시에 교체해야합니다.
The number of decimal places for both the upper and lower tolerance values is controlled simultaneously.
상위 및 하위 공차 값에 대한 소수점 자릿수가 동시에 제어됩니다.