Fix the holder third with a self-tapping screw after installation.
Fixați cel de-al treilea suport cu un șurub autofiletant după instalare.
In order to get an antirotation of the structure, you have to put on the base a self-tapping screw
Pentru ca folia să nu se rotească, aplicaţi la baza structurii unui șurub autofiletant.
In the turning stops, the self-tapping screw is turned off.
În opritorul de cotitură, șurubul de auto-decupare este oprit.
The slotted self-tapping screw sleeve does not have to be tapped in advance.
Manșonul cu șurub cu auto-filetare nu trebuie să fie înțepenit în prealabil.
Secure the bracket with a self-tapping screw.
Fixați suportul cu un șurub de autoizolare.
We make sure that the self-tapping screw is at the same level as the beacon.
Suntem asigurați-vă că capacul filetat a fost la același nivel ca și farul.
For this, a smaller diameter drill is selected than the self-tapping screw.
Pentru aceasta, este selectat un burghiu cu diametru mai mic decât șurubul cu auto-filetare.
After this, we screw the self-tapping screw of the appropriate length to the stop.
După aceasta, înșurubăm șurubul de autoapăsurare a lungimii corespunzătoare până la opritor.
To pull the parquet board is recommended using a self-tapping screw of the appropriate size.
Pentru a trage panoul de parchet se recomandă folosirea unui șurub de autoaprovizionare cu dimensiunile corespunzătoare.
Problem places - the molding element and the destruction of the rubber washers of the self-tapping screw.
Locuri de probleme - elementul de turnare și distrugerea șaibelor de cauciuc ale șurubului de auto-filetare.
Therefore, it is very practical to explore the application of the self-tapping screw sleeve in the repair of the screw hole.
Prin urmare, este foarte practic să explorați aplicarea manșonului șurubului de auto-înțepare în reparația găurii de șurub.
The cable is laid slightly below the screws in a gentle mode, eliminating the damage to the cable by an awl or self-tapping screw.
Cablul este așezat ușor sub șuruburi într-un mod blând, eliminând deteriorarea cablului printr-un șurub sau un șurub auto.
First, punch the steel plate with a hammer: put the windshield back in place and finish tightening the self-tapping screw.
În primul rând, înșurubați placa de oțel cu un ciocan: puneți parbrizul în loc și încheiați strângerea șurubului de autoizolare.