If the workpiece is bent or twisted, dangerous kickbacks may occur.
Dacă piesa este încovoiată sau răsucită, pot interveni reculuri periculoase.
After condensation, the plastic workpiece is ejected from the open mould.
După condensare, piesa de plastic este scoasă din matriță deschisă.
After sterilization, pour the essence and close the workpiece tightly.
There is a workpiece for the future woman.
If the robot misses a workpiece, there are different demolition scenarios.
Always hold the workpiece firmly with the table and the rip fence.
Without the servo system machining center, the workpiece cannot...
Fără centru de prelucrare sistem servo, piesa de lucru nu se poate...
Sew the lining with our workpiece along the entire circumference.
Coaseți căptușeala cu piesa noastră de-a lungul întregii circumferințe.
Then they reinsert the workpiece and press the angle shut.
Ulterior, acesta reintroduce piesa și îndreaptă unghiul.
It can machine the workpiece on three sides simultaneously.
Acesta poate prelucra piesa pe trei laturi în mod simultan.
With its help, you can choose the material of the workpiece.
Cu ajutorul ei, puteți alege materialul piesei.
Repeat with the second workpiece the same actions.
Repetați cu a doua piesă de lucru aceleași acțiuni.
Do not bend or twist workpiece while feeding.
Nu încovoiaţi sau răsuciţi piesa în timpul alimentării.