Vertaling van "DashScan" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
DashScan has two kinds of temperature sensors, inside and outside.
DashScan besitzt zwei verschiedene Temperatursensoren, für innen und außen.
Now DashScan will stay in that mode, until you repeat the procedure.
DashScan bleibt nun im eingestellten Modus, bis die Prozedur wiederholt wird.
The picture on the right shows the DashScan harness in place with the two clips closed again.
Das Bild rechts zeigt den Kabelbaum in Position mit wieder geschlossenen Clips.
The installation of the DashScan requires the instrument cluster to be removed from the vehicle.
The center part of the DashScan harness must be approximately in the middle between the two clips.
Der Mittelteil mit den offenen Enden sollte ungefähr in der Mitte zwischen den Clips sein.
These preferences are retained by the DashScan even if the ignition is turned off or the battery is removed.
Diese Einstellungen werden auch beibehalten, wenn die Zündung abgeschaltet oder die Batterie abgeklemmt wird.
If the DashScan is also to be used as a scantool, two more connections are necessary.
Soll DashScan auch als Scantool und/oder Verbrauchsmesser funktionieren, sind noch zwei weitere Verbindungen nötig.
Only operate the DashScan while the vehicle is not moving (for safety's sake)!
If you want DashScan to act as a trip computer again, repeat the procedure: ignition off, press key, ignition on, release button.
Wenn DashScan wieder als Bordcomputer arbeiten soll, einfach die Prozedur wiederholen: Zündung aus, Taste drücken, Zündung an, Taste loslassen.
The maximum speed DashScan can display is 150 mph (or 240 km/h).
Now DashScan is in scantool mode, and comes back up as a scantool, even if you turn off the ignition or start the engine.
Jetzt ist DashScan im Scantoolmodus, und bleibt es auch nach jedem Einschalten der Zündung oder Starten des Motors.
If you are lucky and own an 86-88 V6, and your PROM supports it, you can install a mileage coprocessor that will enable DashScan to calculate and display your current mileage.
Wer einen 86-88 V6 besitzt kann sich glücklich schätzen, denn wenn das PROM es unterstützt kann man einen Verbrauchs-Koprozessor installieren, mit dem DashScan den aktuellen Verbrauch berechnen und anzeigen kann.
The first DashScan (featuring an LCD display) was installed in my 87GT in 1997, and I have had it there for 4 years without major problems, except for the LCD display.
Das allererste DashScan (damals noch mit einem LCD-Display) habe ich 1996 in meinem 87GT installiert, und da läuft es seitdem ohne größere Probleme, mit Ausnahme des LCD-Displays.