Vertaling van "segment test" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Sample segment test, two experimental edge to coincide.
The stability of the individual tunnel elements is tested on the lining segment test rig.
Release the mode button after the segment test () finished.
Nach Beendigung des Segmenttests () die mode-Taste wieder los lassen.
Nevertheless in order to increase stability and long term reliability the segment test is recommended
Trotzdem wird, um die Stabilität und die langfristige Zuverlässigkeit zu erhöhen, der Segmenttest empfohlen
Typical application examples are the measurement of segment moulds and their templates, the measurement of concrete and steel segments and the measurement of complete segment test rings.
Typische Anwendungsbeispiele sind die Vermessung von Tübbingschalungen und deren Schablonen, die Vermessung von Beton- und Stahltübbingen sowie die Vermessung von kompletten Tübbing-Testringen.
This may be a single value for a two segment test fixture or multiple values (i.e. eight segment). Band Tension
TMD7 performs an automatic segment test when the program starts. Measurements are extremely fast and the results are stored.
TMD7 macht beim Programmstart einen automatischen Segmenttest, führt alle Messungen sekundenschnell durch und hält die Messungen fest.
With the segment test all segments of the announcement with four digits are set under tension.
Beim Segmenttest werden alle Segmente der 4-stelligen Anzeige unter Spannung gesetzt.
If you activate the device, a signal is emitted during the segment test.
Einschalten Beim Einschalten, während des Segmenttests wird ein Ton ausgegeben.
Figure 3: Two segment test fixture based on DIN 3017-4 method for band tension.
CALEC ST supports the "blink" network command by reacting as follows: The LCD of the counter keeps changing between the energy and segment test display and thus flashes for approx.
Der CALEC ST unterstützt das Netzwerk-Kommando "Wink" mit folgendem Verhalten: Das LCD des Rechenwerks wechselt zwischen Energie- und Segment-Test Anzeige hin und her, und erweckt somit einen blinkenden Eindruck für ca.
Double voltage mode voltage: 200kV 63kV insulated rod overall test, 500kV and below insulation rod segment test