A pre-screen is fitted to ensure maximum scalping capability and to prevent any undersize material passing through the impactor, maximizing throughput and reducing wear costs.
Este prevăzut un ciur de presortare pentru a asigura capacitatea maximă de prelucrare grosieră și a preveni trecerea oricărui material subdimensionat prin impactor, maximizând debitul și reducând costurile de uzură.
This apparatus consists of a fully guided linear impactor, rigid, with a mass of 6.8 kg.
Această aparatură constă dintr-un impactor liniar rigid, în întregime dirijat, cu o masă de 6,8 kg.
It consists of a trolley and an impactor.
Tolerances of angles for the lower legform impactor at the time of first impact
Toleranța unghiurilor pentru piciorul-manechin folosit ca element de lovire la momentul primului impact
The impactor shall be of steel and of rigid construction.
The impactor shall be so positioned that in the vertical position
The impactor is divided into 2 rows.
Either the impactor or the cab may be tilted
Elementul de impact sau cabina poate fi înclinată,
The impactor and/or the cab shall be so positioned that, at the time of impact
Elementul de impact și/sau cabina se poziționează astfel încât, în momentul impactului,
The centre of the tolerance field shall coincide with the centre of the sphere of the headform impactor.
Centrul câmpului de toleranță coincide cu centrul sferei folosite ca element de lovire.
The PM pre-classifier may be either an inertial impactor or a cyclonic separator.
Sortatorul preliminar de particule solide poate fi un impactor inerțial sau un separator ciclonic.
The requirements for the lower legform impactor are specified in Section 2
Cerințele pentru piciorul-manechin folosit ca element de lovire sunt specificate în secțiunea 2
The upper legform impactor is described in Section 2 of Part V.
Șoldul-manechin folosit ca element de lovire este descris în secțiunea 2 din partea V.