Traduction de "RTDs" en roumain
For temperature measurement systems with sensors like thermocouples, RTDs, and thermistors, the linearity verification may be performed by removing the sensor from the system and using a simulator in its place.
În cazul sistemelor de măsurare a temperaturii cu senzori precum termocupluri, RTD și termistori, verificarea linearității se poate efectua prin îndepărtarea senzorului din sistem și înlocuirea acestuia cu un simulator.
With 3-wire RTDs add 0.05 ohms to the measurement accuracy plus the maximum possible difference between the resistances of the lead wires.
Cu RTD 3 fire adăugaţi 0,05 ohmi la precizia de măsurare, plus diferenţa maximă posibilă între rezistenţele firelor de plumb.
Programming the 726 for characterized RTDs and remote operation
Programarea dispozitivului 726 pentru RTD-uri caracterizate şi operare de la distanţă
The transmitters provide pipe temperatures from RTDs and continuity confirmation; they are typically located at the unpowered end of the heat tracing line.
Transmiţătoarele furnizează temperaturile conductei de la RTD-uri şi confirmarea continuităţii; în mod obişnuit acestea sunt amplasate la capătul nealimentat al liniei de însoţitori electrici.
Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
Măsoară şi detectează sursa de mA, volţi, temperatură (RTD şi termocupluri), frecvenţă, ohmi şi presiune, utilizând modulele opţionale de presiune.
The second channel is user-selectable for 2-, 3-, or 4-wire RTDs, thermocouples, or 4-20 mA transmitters.
Al doilea canal poate fi selectat de utilizator pentru RTD, termocupluri sau transmiţătoare 4-20 mA cu 2, 3 sau 4 fire.
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
Măsuraţi volţi, mA, RTD, termocupluri, frecvenţă şi ohmi pentru a testa senzori, emiţătoare şi alte instrumente
The universal inputs enable the connection of current, voltage, RTDs and TCs.
Intrările universale asigură conexiunea pentru curent, tensiune, RTD-uri şi termocuple.
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Emite/ simulează volţi, mA, termocupluri, RTD, frecvenţe, ohmi şi presiune pentru a calibra transmiţătoare.
To the analog input modules, you can connect an extensive variety of sensors, such as thermocouples, RTDs, thermistors, strain gauges, accelerometers, and LVDTs.
Pentru modulele de intrare analogice, puteti conecta o varietate extinsa de senzori, cum ar fi termocupluri, RTD, termistori, transductoarele, accelerometre, si LVDTs.
The RMM2 accepts up to eight RTDs that measure pipe, vessel, or ambient temperatures in a heat tracing system.
Modulele RMM2 acceptă până la opt RTD-uri care măsoară temperatura conductei, a recipientului sau pe cea ambientală într-un sistem de însoţitori electrici.
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Detectează sursa sau simulează volţi cc, mA, RTD, termocupluri, frecvenţe şi ohmi
The optional process version (models 914X-X-P) provides a built-in two-channel thermometer readout that measures PRTs, RTDs, thermocouples, and 4-20 mA transmitters which includes the 24 V loop supply to power the transmitter.
Versiunea cu procese opţionale (modelele 914X-X-P) dispune de funcţie inclusă de citire termometrică pe două canale care măsoară PRT, RTD, termocupluri şi transmiţătoare 4-20 mA care include alimentarea în buclă 24 V pentru a alimenta transmiţătorul.