The corner joint can be installed using a simple wrench.
Îmbinarea de colţ poate fi instalată folosind o cheie simplă.
The overlap is the simplest corner joint used in frame making.
Asamblarea la jumătatea lemnului este cea mai simplă îmbinare în colţ în construcţia de rame.
An inaccuracy when cutting the section tube to length can be easily rectified thanks to the corner joint system.
O inexactitate apărută la tăierea profilelor de montaj la lungimea necesară poate fi remediată cu uşurinţă datorită sistemului de îmbinări de colţ.
This system consists of just three basic components; the specially-developed corner joint and matching section tube enable safe, quick and easy bathroom installation.
Acest sistem este format din doar trei componente de bază; îmbinarea de colţ dezvoltată special şi tubul de secţiune aferent permit instalarea sigură, rapidă şi uşoară a băii.
Based on these results, it is concluded that the bending strength value of a corner joint constructed with insert fitting could be sufficiently estimated by the measured holding strength value of the corresponding insert fitting.
Pe baza acestor rezultate se concluzioneaza faptul ca valoarea fortei de incovoiere a imbinarilor de colt realizate cu accesoriile metalice de prindere ar fi estimata suficient de bine prin masurarea fortei de strangere a feroneriei corespunzatoare.
For fastening pipes, on walls, clips are used, they are installed through 1.5-2 meters on straight sections and in each corner joint.
Pentru țevi de fixare, pe pereți se folosesc cleme, care sunt instalate cu 1,5-2 metri pe secțiuni drepte și în fiecare articulație de colț.
The pull of the corner joint always forms a right-angled connection that can be undone at any time.
Prin strangerea elementului de colt se formează întotdeauna o conexiune in unghi drept care poate fi desfacuta în orice moment.
Always a right-angled connection via the corner joint
Intotdeauna o imbinare in unghi drept prin intermediul elementelor tip coltar
The beading in the edge area of the section tube holds the corner joint tightly and also improves the tube stability.
Fălţuirea din capatul profilului de montaj ţine strâns îmbinarea de colţ şi, de asemenea, îmbunătăţeşte stabilitatea profilului.
In the impregnation of individual parts, increased protection of bluing and rotting is achieved, particularly in the corner joint area (tongue-and-groove).
La impregnarea pieselor separate se obține o protecție crescută împotriva albăstrelii și a putregaiului, în special în zona îmbinărilor cu lambă și uluc.
I think I was eating a nice steak at some corner joint in the Bronx where nobody knew me.
Cred ca mâncam o friptura într-o bodega pe un colt, în Bronx, unde nu ma știe nimeni.
Here, a simple connection is established between TECEbox and profile braces using a corner joint.
Aici, între TECEbox şi suportul pentru profil este realizată o conexiune simplă utilizând o îmbinare de colţ.
Three simple components - the TECEprofil corner joint, section tube and wall mounting bracket - help to achieve a stable pre-wall construction.
Trei componente simple - îmbinare de colţ TECEprofil, teava profilata şi suport de montare pe perete - ajută la obţinerea unei construcţii stabile încastrate.
Contenu potentiellement sensible ou inapproprié
Les exemples vous aident à traduire le mot ou l’expression cherchés dans des contextes variés. Ils ne sont ni sélectionnés ni validés par nous et peuvent contenir des mots ou des idées inappropriés. Signalez des exemples à modifier ou à retirer. Les traductions potentiellement sensibles, inappropriées ou familières sont généralement marquées de rouge ou d’orange.