The leading '0' represents out- put coils or function code 5.
Some devices support a special command to manipulate a single bit within a register (function code hex 0x16 or decimal 22).
一部のデバイスはレジスタ内の 1 ビットを操作する特別なコマンド をサポートしています (ファンクション コード 0x16 (16 進) または 22 (10 進 ) ) 。
Ordinarily they are used as a function code inside the subsystem.
通常は、サブシステム内の機能コードとして使用する。
It offers us the chance to test different functions in a safe environment and validate the function code with ideal sensors in an ideal environment as a first step.
安全な環境で様々な機能をテストし、理想的な環境で理想的なセンサを使用して、機能コードを検証する機会を最初のステップとして提供することです。
This may be because the function code is only applicable to newer devices and was not implemented in the unit selected.
このファンクションコード は新しいデバイスにだけ適用できるか、選 なファンクション) 択したユニット に実装されていないことが原因である可能性があります。
Although specific values for the function code of system calls are implementation-defined, different negative values are allocated in each respective system call.
システムコールの機能コードの具体的な値は実装定義とするが、システムコール毎にそれぞれ異なる負の値を割 り付けることとする。
When enabled, the driver uses function code 0x16, regardless of this setting for single register writes.
有効になっている場合、この単一レジスタ書き 込みの設定に関係なく、レジスタへの書き込みにファンクションコード 0x16 を使用します。
A function code must be a positive value, so the most significant bit is always 0. pk para points to a packet of parameters passed to this system call.
通常は、サブシステム内の機能コードとして使用する。 ただし、機能コードは正 の値でなければならないため、最上位ビットは必ず 0 となる。
If not enabled, either function code 0x06 or 0x10 is used for bit within word writes.
無効になっている場合、Word 内のビットの書き込みにはファンクションコード 0x06 または 0x10 が使用されま す。
Note that in an environment of 16-bit width, only 7 bits (0-127) of INT type is available as a function code.
INT 型が 16 ビット幅の環境では機能コードとして使えるのは 7 ビット分(0~127)になるため注意が必要である。
This makes it possible to directly validate the function code and application layer for V-ECUs without the need to integrate the complete basic software stack.
このため、ベーシックソフトウェアスタック全体を統合することなく、V-ECUのファンクションコードとアプリケーションレイヤーの妥当性確認を直接行うことができます。
Positive values are allocated to the function code of extended SVC.
拡張 SVC の機能コードには正の値を割り付ける。
If this setting is disabled, the driver uses either function code 0x06 or 0x10, depending on the Modbus Function 06 property for single register writes.
この設定が無効になっている場合、ド ライバーはModbus 関数 06プロ パティの設定に応じて、単一レジスタへの書き込みにファンクションコード 0x06 または 0x10 を使用します。