It was DEC's first microprogrammed machine.
DEC初のマイクロプログラム方式マシンである。
However, in addition to the IBM 3090, there are several other examples of microprogrammed designs that incorporated branch prediction.
しかし IBM 3090 以外にもマイクロプログラム方式で分岐予測を行う設計がいくつか存在した。
This computer was reported at IFIP in 1962 and attracted attention for its variable microprograms implemented by patch-boards and by punched hole cards covering photo-transistors. Based on this technology, the development project of a commercial high-speed microprogrammed computer, TOSBAC-3400, was started and he assumed the chief design engineer of the project. This computer was used widely in the computer centers of local universities primarily for FORTRAN calculation and camera manufacturers for lens designs.
光電素子に被せたパンチカード,およびパッチボードで実現した可変マイクロプログラムが1962年の国際情報処理学会(IFIP)で注目された.これを基に高速マイクロプログラム計算機TOSBAC-3400が1963年から開発され,その主任設計者となった.FORTRANを中心に使った地方大学のコンピュータセンタやレンズ設計用にカメラメーカに普及した.
In 1961, a joint research project with Assistant Professor (at that time) Hagiwara of University of Kyoto was started and the first full-scale microprogrammed computer, KT-P, was completed.
1961年に京都大学萩原助教授(当時)との共同研究が始まり,我が国で最初の本格的なマイクロプログラム計算機KT-Pilotを完成した.
System Programs for MELCOM-1530-Computer Museum Mitsubishi Electric's MELCOM-1530 system announced in 1963 was a computer that adopted an innovative method called "stored logic," which pioneered microprogrammed control.
MELCOM-1530用システム・プログラム-コンピュータ博物館 1963年に発表された三菱電機のMELCOM-1530システムは,マイクロプログラム制御のさきがけとなるストアードロジックという画期的な方式を採用したコンピュータであるが,そのプログラムの作成やテストを容易かつ効率的に行うために,次のような体系のシステム・プログラムが作成された.
The VAX 9000, announced in 1989, is both microprogrammed and pipelined, and performs branch prediction.
1989年に発表された VAX 9000 はマイクロプログラム方式でパイプラインを使っており、何らかの分岐予測を行っていた。
A Group 1 OPR instruction that has none of the microprogrammed bits set performs no action.
グループ1のOPR命令で、マイクロコード化されたビットを全くセットしない場合、何も行われない。
In 1978, Toshiba licensed the design of a low-cost large-scale microprogrammed computer of its own design, ACOS 600S, to HIS. He was responsible for technology and business negotiation and contracts with HIS and NEC.
東芝で開発したマイクロプログラム方式の低価格大型コンピュータACOS-600Sの設計を1978年HISにライセンスした.HISおよび日本電気との技術と事業の折衝と契約を担当した.
Based on this technology, the development project of a commercial high-speed microprogrammed computer, TOSBAC-3400, was started and he assumed the chief design engineer of the project. This computer was used widely in the computer centers of local universities primarily for FORTRAN calculation and camera manufacturers for lens designs. Toshiba became affiliated first with Computer Division of General Electric, which was then annexed into Honeywell Information Systems (HIS).
光電素子に被せたパンチカード,およびパッチボードで実現した可変マイクロプログラムが1962年の国際情報処理学会(IFIP)で注目された.これを基に高速マイクロプログラム計算機 TOSBAC-3400 が1963年から開発され,その主任設計者となった.FORTRANを中心に使った地方大学のコンピュータセンタやレンズ設計用にカメラメーカに普及した. 東芝は当初,GE電算機事業部と技術提携をしていたが,HIS(Honeywell Information Systems)に吸収後は日本電気と共通の提携先となった.