And then he did this crazy triple stepover and it was clean through!
The initial stepover is calculated from the maximum distance between these two selected curves.
La prise de passe initiale est calculée à partir de la distance maximale entre les deux courbes sélectionnées.
With this cycle's constant 3D stepover ESPRIT Mold produces uniform milling of multiple complex surfaces with a single machining operation.
Avec la prise de passe 3D constante de ce cycle, ESPRIT Mold génère un fraisage uniforme de plusieurs surfaces complexes en une seule opération d'usinage.
Nice stepover in a charming hotel located away from busy roads.
Etape agréable dans un hôtel de charme situé en dehors de toute circulation.
This pivotal movement of the dispensing and compacting blocks produces the unique stepover or the looping of the tape.
Ce mouvement de pivotement des blocs de distribution et de compression produit l'enjambement unique ou la formation de boucles de la bande.
The cutting depth ap and the stepover ap along with the machining feed allow calculation of the material removal per unit of time (cm3/min).
Il en va de la profondeur de coupe et le recouvrement avec l'alimentation d'usinage permettant de calculer l'enlèvement de matière par unité de temps (cm3/min).
Reverse stepover to the left
The Axial stepover represents the spacing of the measurement points along each "band", expressed in current drawing unit.
Le pas axial (Axial stepover) représente l'écartement des points de mesures le long de chaque "bande", exprimé en unité de dessin en cours.
Axial stepover: Lenght of each step along each Y scanline in drawing unit.
Axial stepover: taille de chaque pas le long de chaque ligne de balayage Y dans l'unité de dessin courante.
Did you leave your stepover at home?
Tu as oublié ton talent à la maison, Mackan?
We're famiIiar with his stepover, but he now has a new move.
Stepover: This is the amount of material removed in each clearance cut.
Pas de passe: C'est la quantité de matière enlevée à chaque passe de dégagement.