Examples with "commandes boot" and their translation in Engels
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Les commandes boot systems sont dans l'ordre correct dans la configuration.
The boot system commands are in the right order in the configuration.
Les arguments d'initialisation sont désormais pris en charge dans le cadre des commandes boot et reboot.
Solaris Zones Boot Enhancements now support boot arguments as part of boot and reboot.
Andere resultaten
Dans OpenBoot, la commande boot utilise une série de mots clés pour identifier la cible iSCSI.
The boot command in OpenBoot takes a series of keywords to identify the destination iSCSI target.
Si tout a été fait correctement, la commande boot net depuis l'OpenPROM devrait charger l'image.
If you've done all this correctly, giving the command boot net from the OpenPROM should load the image.
Sur les systèmes SPARC, ajoutez l'option -s à la commande boot.
On SPARC based systems, add the -s option to the boot command.
À la fin de la commande boot, vous pouvez passer d'autres paramètres d'amorçage à l'installateur.
You can pass extra boot parameters to debian-installer at the end of the boot command.
Pour générer un message au démarrage de chaque service au cours du processus d'initialisation, exécutez l'option -v avec la commande boot.
To generate a message when each service is started during the boot process, use the -v option with the boot command.
Si vous avez des entrées de commande boot system dans votre configuration, vous devez les retirer de la configuration.
If you have boot system command entries in your configuration, you need to remove them from the configuration.
Vous pouvez aussi configurer la méthode d'installation et les paramètres réseau à l'invite de commande boot: elle-même.
You may also configure the installation method and network settings at the boot: prompt itself.
Pour un noeud du cluster global, utilisez les commandes clnode evacuate et shutdown, suivies de la commande boot ou b
For a global-cluster node, use clnode evacuate and shutdown, followed by boot or b.
Vous pouvez spécifier qu'un système SPARC est initialisé à l'aide du protocole DHCP lorsque vous exécutez la commande boot.
You can specify that a SPARC based system boot by using the DHCP protocol when you run the boot command.
Pour un noeud du cluster global, utilisez la commande boot ou b. Pour un noeud du cluster de zones, utilisez la commande clzonecluster boot.
For a global-cluster node, use the boot or b command. For a zone-cluster node, use the clzonecluster boot command.
En cas d'utilisation de l'option -v, la commande boot (initialiser) affiche des informations de débogage exhaustives à l'écran.
When you use the -v option, the boot command displays verbose debugging information on the screen.
Potentieel gevoelige of ongepaste informatie
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.